|
| Produk
// Smart Target Flow Meter |
|
|
|
|
| ATF80 Series |
|
ATF80 Smart Target flowmeters apply new capacitance sensors to the target flowmeters, process the detected sensor signal, through digital technique and micro-electric technology, to 4-20mA output which is proportional to flow.
Smart Target Flowmeters are suitable for low-velocity & high-temp. gas, steam flowrate. If there is an error of measuring range, you can only change target for satisfying correct application and it is no need to change the whole flowmeter.
|
|
|
|
| FEATURES |
|
 Can measuring the low velocity less then 0.1 m/s
It's able to measure high-temp., low-press. and low-velocity flare gas.
4-20 mA output Hart communication
Low Pressure lose
The Max. temperature can be up to 450 oC
Powerful Alia software can be online calibration
For large pipeline, use Insertion Type or Hot-Tap Type
|
| |
| SPECIFICATION |
|
| Size: |
Local Display: |
| 15,20,25,32,40,50,65,80,100,125,150 |
4 lines LCD (with backlight) |
| 200,250,300...6000(mm) |
5 digit flowrate |
| Measuring Range: |
8 digit Totalizer |
| Steam: 0.002 ~ 3400000 Ton/Hr |
Current Output: |
| Gas: 1 ~ 3280000 NM3/Hr |
4-20 mA 2 wire |
| Liquid:0.1 ~ 55800 M3/Hr |
Load |
| Material: |
Rohm=(Vdc-10)*50 |
| Stainless Steel 304 / 316 |
Alarm Function: |
| Accuracy: |
High / Low Alarm |
| Wafer / Flange Type |
Turndown Ratio: |
| +/-0.75% of reading |
15:1 |
| Insertion Type |
Communication: |
| +/-1.6% of reading |
Hart Signal |
| Repeatability: |
Data Storage: |
| +/-0.05%FS |
Operation Parameters and Totalization |
| Multi Flow Range: |
figures are stored by EEPROM for more |
| 1- 3 flow range |
than 10 years |
| Process Connection: |
Housing Material: |
| Flange / Wafer / Insertion |
Aluminum Alloy |
| Flanges Type: |
Cable Entry: |
| JIS 10K / JIS 20K / JIS 40K |
2 X M20 * 1.5 |
| ANSI 150# / ANSI 300# / ANSI 600# |
Power Supply: |
| PN 10 / PN 16 / PN25 / PN 40 |
10-32 VDC |
| Ambient Temperature: |
Power Effect: |
|
|
<=0.01% / V |
| Temperature Effect: |
Keyboard: |
|
|
3 keys from internal for Programming |
| Max. Pressure: |
and display control |
| 100 Bar |
Low Flow Cutoff: |
| Working Temperature: |
0 to 20% |
| Flange / Wafer |
Damping: |
|
|
0 to 32 Seconds |
| Insertion |
Protection: |
|
|
IP 67 |
| Hot Tap (Retractable) |
Explosion Proof, Exd IIC T6 |
|
|
Intrinsically Safe, E ex ia IIC T4 | |
|
|
|
 |
|
|
.jpg)
.jpg)
