Excitation:	Keypad:
DC pulsed	3 external keys for programming
Display:	and display control
3 lines LCD with illumination	Data Storage:
Line 1	Operation parameters and totalizer
11 digit totalizer for forward flow	figures are stored by EEPROM for more
11 digit totalizer for reverse flow	than 10 years
11 digit totalizer for difference	Low Flow Cutoff:
Line 2	0 to 9.9 %
5 digit flowrate / velocity / % / mA / HZ	Damping:
Line 3	0 to 99 Seconds
Parameter / Query / Clr tot / Query LOG	Density Setting:
Alarm, Guidance	0.1 to 9.99 g/cm3
Totalizer Unit	Self Diagnosis:
T, Kg, g, lb, Ston, Lton, m3, L, mL, lgal, gal,	The following error message are
Mgal, bbl, fr3, a-ft	displayed if failure occurs
Time Unit	- Coil failure
sec, min, hour, day	- Power failure
Measuring Range:	- Overranged output
Min.  0 to 0.15 m/s	- Internal error
Max. 0 to 15 m/s	- Overflow
Accuracy:	- Empty pipe
+/-0.4% of reading (Velocity >= 0.5 m/s)	Cable Entry:
+/-0.002 m/s (Velocity < 0.5 m/s)	Standard :PG11 Option:1/2"NPTF
Repeatability:	Protection Class:
+/-0.1% of reading	IP 65
Current Output:	Ambient Temperature:
4-20 mA (Isolated)	-25 to +65 oC
Load	Material:
Max. 600	Aluminum Alloy
Pulse Output:	Power Supply:
Open collector	90-260 VAC, 50/60 Hz
Rating	24VDC +/-10% (Option)
3 to 30 VDC, 20 mA Max.	Power Consumption:
Pulse Rate:	3-17 W (Dependent on sensor size)
1)Scale pulse (Pusle/mL, Pulse/L, Other)	Weight:
2)Frequency: 0-5000 Hz	1.4 Kg
Pulse Width:	Mounting:
50% of band width	Wall mounting
Alarm:	Bracket on 2" pipe
High/Low with open collector output
Rating
3 to 30 VDC, 20 mA Max.
Communication:
RS485 (MODBUS Protocol)
HART signal (Compatible)